Category Archives: Operating Events

Year of the Club Special Operating Event

Posted on by

Attention all Massachusetts Clubs,

This is your chance to participate in the Year of the Club special operating event!

If you would like to operate W1AW/1 as a club and reserve a 4-hour block of time between February 11th and the 18th please contact Larry, W1AST, no later than January 20th.

Email: FunHamRadio@gmail.com

The station can set up as a club, at a club member’s house, or as an individual; an individual can sign up to operate the whole week (we share a spreadsheet with the ops who have signed up). A club has a day, band(s), time, and mode(s), usually for a 4-hour block. The club or op can set up anywhere in Massachusetts. No other special rules except operators etiquette and only one op per band/time/mode at a time. For example, you could have 3 stations on 20M using 3 different modes.

All ops would need to be listed when the logs are turned in to me no more than 2 days after 2/18. ALL logging must be by computer so an log ADIF file can be sent to me at the end.

So far, the Barnstable ARC and the Mohawk ARC are the only clubs to have signed up. We really need more Massachusetts representation for the event. Please consider it! It is a rush to have stations calling you just like being a DX station.

Thank you,
Larry, W1AST
ARRL WMA Affiliated Club Coordinator

Foxhunt on New Years Day

Posted on by

If there is anyone interested in foxhunting here is an activity that has been held on New Years Day for some years now. It’s not your average foxhunt. Read on:

Greetings Foxhunters,

Keeping with tradition, I will be hosting a Foxhunt on New Years Day at 1pm.

This hunt will be conducted in the same manner that we have previously conducted live foxhunts.  The hunters will assemble at the  91 Ayers Road in South Windsor, CT, home of the old Wapping Elementary School, be set up and ready to start by 1pm. The fox will take a roll call at 1pm on the BEARS repeater, 145.110 MHz, PL tone is 77.0 Hz.  This hunt will be conducted using the repeater for all communication and information sharing.  I encourage communication between participants and any base stations that can supply helpful information to the hunters.  Once you have spotted the fox you should stop all transmissions.  Pay attention, if someone says they are going to check an area and you never hear from them again, that might be a clue.  Remember not to hunt the repeater output frequency as that will just lead you to the repeater.  I will not be there.  You will want to listen on the repeater input frequency, 144.510MHz.  That is the frequency the fox will be transmitting on.

The fox will be located within 20 air miles of the starting point and not within Hartford or Springfield.  The fox will be on publicly accessible property that will not require anything other that a standard passenger car for access.  The fox will host a “tailgate” party at the end of the hunt at the “den”. 

If this is your first hunt, I would recommend riding along with someone who has done this before.  Dress warmly as you will be outside at the end for the party, the rest of the time you will be in and out of the car taking bearings etc.

Experience has shown that hunters will start arriving in the den about 1 hour after the start.  The event has a two hour time limit not including socializing in the den at the end.

Current information regarding this and other foxhunts in Connecticut are on groups.io. If you are not already a group member, you may want to consider signing up for the groups.io CTFOXHUNTER so that you do not miss any important foxhunt related news.

73,Paul, N1TUP

Foxhunt in South Windsor CT on New Years Day

Posted on by

Greetings Foxhunters,

Keeping with tradition, I will be hosting a Foxhunt on New Years Day at 1pm.

This hunt will be conducted in the same manner that we have previously conducted live foxhunts.  The hunters will assemble at the 91 Ayers Road in South Windsor, CT, home of the old Wapping Elementary School, be set up and ready to start by 1pm. The fox will take a roll call at 1pm on the BEARS repeater, 145.110 MHz, PL tone is 77.0 Hz.  This hunt will be conducted using the repeater for all communication and information sharing.  I encourage communication between participants and any base stations that can supply helpful information to the hunters.  Once you have spotted the fox you should stop all transmissions.  Pay attention, if someone says they are going to check an area and you never hear from them again, that might be a clue.  Remember not to hunt the repeater output frequency as that will just lead you to the repeater.  I will not be there.  You will want to listen on the repeater input frequency, 144.510MHz.  That is the frequency the fox will be transmitting on.

The fox will be located within 20 air miles of the starting point and not within Hartford or Springfield.  The fox will be on publicly accessible property that will not require anything other that a standard passenger car for access.  The fox will host a “tailgate” party at the end of the hunt at the “den”. 

If this is your first hunt, I would recommend riding along with someone who has done this before.  Dress warmly as you will be outside at the end for the party, the rest of the time you will be in and out of the car taking bearings etc.

Experience has shown that hunters will start arriving in the den about 1 hour after the start.  The event has a two hour time limit not including socializing in the den at the end.

Current information regarding this and other foxhunts in Connecticut are on groups.io. If you are not already a group member, you may want to consider signing up for the groups.io CTFOXHUNTER so that you do not miss any important foxhunt related news.

73,
Paul, N1TUP